Search results

Kaylx_ as promised: NT Lite Version [v2.0.0.7797] If I run my builds as a single-pass, integrating all of my drivers (Sound, Input, Video, etc.) unnecessarily into Boot.wim, I observe a growth of my Boot.wim from 382mb to 2,780mb (almost a 10x) It gets to be so big, that older computers with...

Oui! I was actually just about to post this as well! I noticed that there is no way to flag certain drivers (for example, Storage and Network), which are the only ones to be updated in Boot.Wim, and the balance of drivers (Video, Sound, Mgmt, Input...in addition to the original Storage and...

All: This turned out to be the Video driver used by the virtual VGA controller in the Dell 14th Generations and Dell 15th generation iLOM (iDRAC8 and iDRAC9). The driver is by Matrox : mxg2wdo.inf, mxg2ws16.inf, MxG2wDO64.sys, Matrox G200eW (Nuvoton), version 4.04.02.001 , G200eW and...

Thank you all on this thread: Very useful information. Before I make a decision to remove WinPE from Boot.Wim: Question: If one enables Unattended Install in an bootable ISO, is there any "Shortcut key" so that one can still access/enter into the WinPE Recovery image? NOTE (For further...

Good question; did you ever figure out how to integrated D.A.R.T. ? Apparently it is distributed as an ISO, not a WIM. So perhaps there is a way to integrate it post-NTLITE-ISO Build, possibly RUFUS can make a boot menu selector (in GRUM), to choose from multiple ISOs...

That was very helpful response! >:}

Kasual merci. In backing out all of my driver updates, the problem disappears. The good news is that, unlike Win 10 Ent LTSC v1809, there is very little to add/customize as far as drivers in Win Server 2016 (v1607) So it shouldn't be too hard to make process of elimination, now that I can...

All: Happy Tuesday. I'm customizing Dell's PowerEdge Win Server 2016 Image. Upon unattended installation, after first boot, the image spends a significant duration of time at "Getting Devices Ready". 10 minutes+ Then another 10 minutes after second reboot , before proceeding to...

Started making my NTLite builds on a Dell Precision 5820XL, NVMe SSD, 32GB ECC, Desktop Xeon 20+ Cores. #smokin'

All: Has anyone found a way to integrate the package: Intel Management Engine Components Driver? As a standard INF/DLL/etc driver. I see in another thread, someone is just calling the installer silent as a post-OOBE script > call "%WINDIR%\Setup\Files\850 G1 Drivers\Intel Management Engine...

So I think I'm beginning to understand what is going on here. I had some services that were corrupted after installation (W32tm, etc.) I was able to fix W32tm with: - w32tm /unregister - reboot - w32tm /register - reboot - w32tm /config [...]...

All: Win Server 201x Question (2016, v1607 in my case): In the XML for saved configuration presets, the value for <Tweak> maps to Boot or System? What are the numerical equivalencies? 4 Is Disabled if I believe. I ask because I've had some trouble relating the config values from the...

In the words of Britain's greatest hacker: "WELL sh*t ON ME!"

I have finally acquired a Ent/IOT LTSC Image from a Dell Recovery USB stick; It has previously been ADK/NLite'd by Dell for Dell Precision 5820XL platform. When I load it for the first time, I get an odd, mostly NULL error, about driver integration (Existing item) I have "Auto load saved...

I'd like to see that. Post a video? o_O

I have a 1809/Pro with 16gb RAM, high end i5 (joke), and non-NVMe SSD; which is decent, but the OS is managed by umbrella corporation and lots of agents adding overhead. It takes about 45min-1 hour to "load" an Win Server 2016 or Win 10 LTSC 1809 image. It takes about 3 hours to "commit a...

merci.

If the installer doesn't find a newer generation/exotic RAID or HBA, then that driver needs to be loaded into the "Boot/Setup" (boot.wim) , correct? And , if I add that driver to the main image (Into any OS/product), it WILL NOT automatically also be added to Boot/Setup (setup.wim)? It needs...

I tested NetFX3 integration in both places, and concurrently both, without incident during build. I will run test install results with all three permutations to verify result. NOTE: Hopefully Rockwell Automation will update their code soon to eliminate the need for this legacy framework...

All: Redmond released Win10 "may 2020" aka "20H1" aka version 2004 on Monday. Has anyone run it though NTLite yet? I successfully performed a build? How about with a FOD addition: NetFX3 and NTLite was asking for the CABs in updates\10.0.1909.x64.FOD\ , so perhaps I thought a new build of...