No Drivers? and blue screen (Windows 7)

ultraform

Member
Hi
with this preset.
After first start of install I got this,( No drivers ) ?
Then if I restart I only get Blue screen and cant login to desktop.
What can it be, something I removed or settings ?

A other thing If I remove,change settings and stuff before add drivers(like with this preset)
I got error with the added drivers see NTLite picture.
But if Idont use preset or remove or somethings then add drivers then it works fine to add drivers even with Boot wim.
 

Attachments

  • 21312312.jpg
    21312312.jpg
    94.4 KB
  • 2332131232.jpg
    2332131232.jpg
    138.3 KB
Last edited:
Got similar with new test and preset.
Under installation when almost finish it reboots, then it’s says "start windows in safe mode or start normally"
doesn’t matter what I press it comes to login in screen and loading for a short while then restart.
 
Hi again
Now I tested older version
I removed alot Drivers, Hardware support I dont need and much more.
With version NTLite v. 1.7.4.6790, Now installation did go well no restart or chrash under login screen installation or missing drivers when come to desktop like picture above.
But when I try modify iso with NTLite v1.9.0.7046, There is something that make this happen and I think I got this problem with 7036 and 7025 allso.
How long time back(with olderNtlite version) this problem have been with windows 7 iso I dont know, I have been modify win 8 and win 10 this year almost only :/
 
New Test
I removed Nothing frome
Network , Remoting and Privacy and System
And still got alot of driver missing at start.

I removed only frome hardware support, Iso image, Localization and Multimedia.
Things I usually remove.

So maybe something frome hardware support that make this error, :/ I have remove this stuff so many times before with older Ntlite and never got this type of error and problem, try to figur out what it can be so can use newest version of NTlite =(
 
Next test
I only removed frome Hardware support now.
and still error.

Something in Hardware support messing =(
 

Attachments

  • 6575675.jpg
    6575675.jpg
    144.7 KB
Yes, and know I did the test again but this time on remove all alot of other things but didnt tuch Hardware and Drivers
And got error anyways =(
 
I have tested your preset newtest.xml the latest prerelease and i can confirm this behavior.
As i can see, your tests are in VMWare, my tests are in VBox.

Try to not remove components that include drivers, the latest preset is removing drivers also.

The test has been made in an already slimmed image that works ok already.
 
Im so confuse now.
I removed alot but nothing was removed frome Hardware or Driver, no components that include drivers or hardware was removed now =(
And still got error.
And when only remove frome hardware I allso got error. Im confuse cant find the problem ='(

2122
 
Last edited:
You have removed hwsupport_tv, mobile pc sensors and ndiscap.

I'll "hunt" for the latest build that is working.
 
This is what it looks like when I load the preset on fresh new iso.
I havent removed mobile pc sensor but I removed NDIS Packet Capturing (NDISCAP)
Maybe Preset is bugging :O ?
Nothing frome Drivers or Hardware support is getting removed.


But when I try only to remove this frome hardware support,
and dont touch the other things I got the same result.
Thats make me confuse :/

Bluetooth
Floppy disk
Infrared deviecs
iSCSI Initiator
Printing
Modem
smartcard
Telephony

2131
 
Back
Top