Skip Windows Setup screen

NTLite enables the RDP server, but it doesn't automatically open it from Windows Firewall.
Code: 
netsh advfirewall firewall set rule group="remote desktop" new enable=Yes

PowerShell:
Code: 
Enable-NetFirewallRule -Name "RemoteDesktop-UserMode-In-TCP"
Enable-NetFirewallRule -Name "RemoteDesktop-UserMode-In-UDP"
 
Hello All,

I am trying to build an image of win 11, i would only need to bypass the initial setup for language, oobe and automate the wipe of the c drive so once installed it will go straight to the account login.

The issue here is that i am not able to automate the wipe of the drive and the automatic installation as i get the error in the screenshot, it happens immediately after installing the updates.

please see the screenshots below and the configurations.

can you please let me know what I am doing wrong? I have the full license of Ntlite.

Thanks in advance.
A.


 

Attachments

  • a5be2d70-9d2a-44cb-999a-9daf9ddc5ac4.JPG
    a5be2d70-9d2a-44cb-999a-9daf9ddc5ac4.JPG
    114.3 KB
  • ed840722-e7e8-4298-a49a-8809ff59f9c5.JPG
    ed840722-e7e8-4298-a49a-8809ff59f9c5.JPG
    116.1 KB
  • aa366a16-fb63-4325-83e2-32ce767aa36a.JPG
    aa366a16-fb63-4325-83e2-32ce767aa36a.JPG
    63.7 KB
Normally, this error has two possible causes:

1. Missing the driver for your disk controller or storage device. Try Unattended without a disk layout, to confirm.
2. Wrong UEFI (GPT) or MBR boot mode in BIOS.
 
You must log in or register to reply here.
Back
Top