TUTORIAL: Create perfect Windows Post-Setup using OOBE.cmd

NitrousX said:
I have attached the unattended xml, I have tried shortening the hostname, organisation name and company name still same msg. Also just as a tst i used a answer file from https://www.windowsafg.com/win10x86_x64_uefi.html. This worked but some of the apps i put into the script folder did not install despite following the instructions above. Only one that installed ok was 7zip What is a SPPX?
Click to expand...

Try to delete this from your unattended. This is the "SPPX" what I was talking about.

Code: 
        <component name="Microsoft-Windows-Security-SPP-UX" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <SkipAutoActivation>true</SkipAutoActivation>
        </component>

If it doesn't help, then continue with this part, remove <ProductKey></ProductKey>, try again. If it doesn't help, then remove <CopyProfile>true</CopyProfile>, then it must work.
Code: 
        <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <ComputerName>Fractal</ComputerName>
            <CopyProfile>true</CopyProfile>
            <ProductKey></ProductKey>
            <RegisteredOwner>Samuel</RegisteredOwner>
        </component>
 
George King said:
Try to delete this from your unattended. This is the "SPPX" what I was talking about.

Code: 
        <component name="Microsoft-Windows-Security-SPP-UX" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <SkipAutoActivation>true</SkipAutoActivation>
        </component>

If it doesn't help, then continue with this part, remove <ProductKey></ProductKey>, try again. If it doesn't help, then remove <CopyProfile>true</CopyProfile>, then it must work.
Code: 
        <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <ComputerName>Fractal</ComputerName>
            <CopyProfile>true</CopyProfile>
            <ProductKey></ProductKey>
            <RegisteredOwner>Samuel</RegisteredOwner>
        </component>
Click to expand...
Hi George thank after several attempts booting the answer file i then went back to the unattended menu and just unchecked the product key and the copyprofile it now works thank you.
 
Issue I have now is that the apps that i put under the setup file with the silent switches are not installing. Only app that has installed successfully is 7zip. I have gone to the extent to adding the different switch commands depending on the installer in the text file as you described. With the cmd files do i need to add all of them to the post setup. Or is just the case of them just being in the folders? I added them anyway but it has not made a difference. Just need some clarification thanks
 
George King said:
I don't think its needed, as updates for different operting system going to fail.. But it can be done by reading filename 6.1 - Windows 7 etc.. But also seems interesting, I will test it to have clear way instead of trying installing W10 update on W7

ege914 write me PM, I want to discuss about more ideas :)
Click to expand...
I need subfolder for my custom Acrobat Reader DC installation. Maybe this works, i'll make a cmd file that calls subfolder \AreaderDC\setup.exe
If it works I´ll explain here.
 
Juankar said:
I need subfolder for my custom Acrobat Reader DC installation. Maybe this works, i'll make a cmd file that calls subfolder \AreaderDC\setup.exe
If it works I´ll explain here.
Click to expand...
Better to repack your needed files into SFX installer using WinRAR
 
Hello i want to set K-Lite-Codec-Pack to a unattended install, but the programm needs a ini file.

In my txt file i wrote: /VERYSILENT /NORESTART /SUPPRESSMSGBOXES /LOADINF="klcp_standard_unattended.ini"

but the install failed, i think its a problem with ini file.
 
ronny130286 said:
Hello i want to set K-Lite-Codec-Pack to a unattended install, but the programm needs a ini file.

In my txt file i wrote: /VERYSILENT /NORESTART /SUPPRESSMSGBOXES /LOADINF="klcp_standard_unattended.ini"

but the install failed, i think its a problem with ini file.
Click to expand...

Silent install guide for K-Lite Codec Pack

Simple instructions for creating a custom unattended installation for the K-Lite Codec Pack.
codecguide.com
 
Copy your INI file to the image's sources\$OEM$\Setup\Files folder, or use Post-Setup to add a File.
Then change K-Lite's parameter to:

/LOADINF="%WINDIR%\Setup\Files\klcp_standard_unattended.ini"

The file path is very important, because most CMD wrapper scripts don't switch directories while running.
 
K-Lite's /unattend feature creates a unattend.bat; which tries to switch to the proper folder, or recommends using a full path (which we already fixed for you).

@REM Changing working directory to location of installer:
cd /D "%~dp0"
@REM Alternatively, you can specify the full paths to both .exe and .ini file
"K-Lite_Codec_Pack_1670_Basic.exe" /VERYSILENT /NORESTART /SUPPRESSMSGBOXES /LOADINF="klcp_basic_unattended.ini"
Click to expand...
 
Last edited:
ronny130286 said:
Hello i want to set K-Lite-Codec-Pack to a unattended install, but the programm needs a ini file.

In my txt file i wrote: /VERYSILENT /NORESTART /SUPPRESSMSGBOXES /LOADINF="klcp_standard_unattended.ini"

but the install failed, i think its a problem with ini file.
Click to expand...
There is needed only /verysilent switch. Every other setting can be set using REG tweak
Code: 
https://www.ntlite.com/community/index.php?threads/k-lite-codec-pack.1917/

garlin said:
Copy your INI file to the image's sources\$OEM$\Setup\Files folder, or use Post-Setup to add a File.
Then change K-Lite's parameter to:

/LOADINF="%WINDIR%\Setup\Files\klcp_standard_unattended.ini"

The file path is very important, because most CMD wrapper scripts don't switch directories while running.
Click to expand...
This is not related to this topic. Goal is dynamic setup from DVD / USB instead of copying files to HDD.
 
Cannot, for the love of god, make k-lite installer take into account klcp_standard_unattended.ini.
Tried putting the file in the setup folder and in the $OEM$\$$\Setup\Files as mentioned above - no result.

Applying reg tweaks is a no deal. K-lite installer registers a lot of junk in menus by default, which I don't want. It is too much of a hassle to remove this junk with reg tweaks. I'd rather install it properly the first time with the generated ini file.
 
firsak said:
Cannot, for the love of god, make k-lite installer take into account klcp_standard_unattended.ini.
Tried putting the file in the setup folder and in the $OEM$\$$\Setup\Files as mentioned above - no result.

Applying reg tweaks is a no deal. K-lite installer registers a lot of junk in menus by default, which I don't want. It is too much of a hassle to remove this junk with reg tweaks. I'd rather install it properly the first time with the generated ini file.
Click to expand...

this is what i use,

call ..path\KLiteCodec.exe /verysilent /norestart /SUPPRESSMSGBOXES /FORCEUPGRADE /LoadInf="..path\Codec.ini"
 

Attachments

You must log in or register to reply here.
Back
Top